Should You Add Water Saving Implementations When Remodeling Your Los Angeles Home?

When you plan your Los Angeles home remodeling project, should you add water-saving implementations and use materials? Read on to find out.

Water usage reduction is important everywhere because we all know that few natural resources are as vital as water. Water restrictions can result in severe fines and penalties if you don’t comply with them.

However, even if there wasn’t such a need for water conservation, it would still be wise to reduce the amount of water that your family uses at your home. It also helps when you can contact home remodeling contractors to get the project started.

Save Money While Remodeling Your Home

Over the last couple of years, many different solutions have been developed to help people save money on their bills and also preserve an increasingly precious natural resource at the same time.

One of those inventions is a special kind of showerhead called a low flow showerhead. These devices are designed to decrease the amount of water that is used when showering. A lot of home renovation projects consider using these types of showerheads.

These types of devices are often very economical in terms of their impact on your wallet because they use less than 1.5 gallons per minute of flow rate. This ensures that you get clean without wasting too much water during your bath or shower session.

The low flow head works by using a replaceable screen filter which will trap the sediment and thus prevent it from going down the drain during each showering session.

Ways To Save Money On A LA Home Remodel Project And Reduce Usage Of Natural Resources

This has helped thousands of people save money on their utility bills. If you are looking into ways that you can save money on your next renovation project, then these tips will be of great interest to you. You could also find plenty of affordable home remodeling services locally.

Water-Saving Shower Head

Low flow showerheads are often installed by plumbers to help improve the water pressure in bathrooms, where it might have been reduced due to the clogging of the pipe network over time.

There are two types of low-flow showerheads available in the market today; one type is a simple one that has a plastic casing and rubber jets in it, while another type is made up of ceramic material with metal-ceramic jets instead of rubber ones.

The ceramic versions tend to reduce limescale buildup inside them because they don’t allow calcium to build up when compared to the cheaper plastic versions.

Saving Water in the Kitchen

There are also low-flow faucets that can be installed in your kitchen sink to save water when doing the dishes or preparing meals. These types of devices are usually labeled as single-lever mixer units, which will reduce your overall usage when you turn on the faucet.

They have a twist handle with a fixed middle stream, so any additional streams must come from an additional tap giving you ultimate control over how much water you want to use for each task.

The Best Way to Get Rid of Waste Water

Taps and showerheads usually make up most of the household’s water-using fixtures and fittings, but there is another system that uses quite a lot of water, and that is a home’s drain and waste system.

Waste pipe networks use a water trap to ensure that no odors from the sewer from getting inside your house. When you have no running water in them, they will allow air through, but as soon as the water starts moving again, it will create a vacuum effect which will seal off the opening.

You should also consider replacing old single-flush fixtures with modern dual-flush ones which use less than 1.6 gallons per flush (GPF). If you like saving even more money, then you might want to replace your current setup with one of those ultra-low flow systems which use about 1 gallon per flush (GPF).

These ultra-low flow fixtures are often found in the industry of sustainable design, and they usually have a water-saving rating of 2 or 3 gallons per flush. You can also get motion-sensing faucets that will switch off automatically after some time has passed if no activity is detected.

These types of fixtures ease up on your daily water usage, and they don’t need you to constantly reach over and turn them off, which means no more cross-contamination from germs either.

Composting Toilets Can Save You Money Too!

Yes, there are toilets available on the market today that use human waste as compost instead of running water, as most traditional kinds do. They conserve a great deal of water, and they also cut down on the need for flushing and the related costs.

Your New Shower Will Save Water As Well!

Modern showerheads come with different spraying patterns and flow rates which you can adjust to your preferences. You will be able to save a great amount of money each year on your utility bills by choosing one of these types of devices.

If you are into the green building, then this is just up your alley, but if you are more practical, then it would be best to choose one that has some sort of rebate program attached to it so that it becomes more affordable.

The Right Way To Redesign Your Bathroom

If you are thinking about remodeling or redesigning your bathroom to increase water efficiency, then it would be best to hire a water-efficient plumber in Los Angeles for the job.

These people have the tools and expertise needed to install new fixtures that will reduce your daily water usage but remember that these things can also be purchased on your own as well if you are into DIY projects. You might want to consider those low-flow showerheads, dual flush toilet systems, and composting toilets as potential renovation ideas.

To make sure you get the most out of any home remodeling project, it is important to carry out extensive research before you hire a contractor or do any work yourself. There is plenty of information available online today that will give you an insight into how much money these changes will save you and whether or not they are worth it.

Last but not least, always consider adding energy-efficient lighting and insulation, which will help you save money on heating and cooling bills as well. Just make sure you consult with a certified green builder in Los Angeles who is experienced in the latest thermal technologies.

What are your thoughts now? Would you add water-saving to your home renovation project?

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
Share on pinterest
Pinterest
Share on email
Email
Scroll to Top